Towel Ring Installation

Tools recommended:
Pencil
Phillips screwdriver
Drill with 3/16th bit
Hammer

Place the mounting bracket against the wall and trace around the inside of the two ovals on the bracket. Gently drill a hole into the center of the traced oval. If you hit a stud, you will not need the anchor.

Carefully tap the drywall anchors into the holes. Screw the bracket onto the wall, using the screws provided, into the two anchor points.

Make sure the set screw is backed out far enough to set the escutcheon over the mounting bracket. Place the escutcheon over the mounting bracket, top first.

Tighten the set screw with the Allen Wrench provided.